Abstract
Empowered by the possibility to automatically identify unique product instances, the Radio Frequency Identification (RFID) technology is expected to revolutionize the supply chain processes. However, in view of the numerous possible ways that RFID can be implemented within the supply chain, the issue of supporting the design choices based on a credible assessment between the current (as-is) and the future (to-be) processes has become a matter of considerable concern and debate for both practitioners and academics alike. To design RFID implementations in the supply chain using a robust dynamic analysis, we resort to discrete event simulation. As a result, this paper conceptualizes the ‘RFID-enabled process redesign’ and proposes a framework regarding all possible types of RFID effects when integrating the technology within the supply chain processes. The research design was based on the empirical evidence through three case studies combined with the development of simulation models and on theoretical constructs regarding the information technology (IT)-enabled process redesign.
Similar content being viewed by others
References
Aldowaisan TA and Gaafar LK (1999). Business process reengineering: An approach for process mapping. Omega 27 (5): 515–524.
Alexander K et al (2003). Focus on the supply chain: Applying Auto-ID within the distribution center. White paper, Auto-ID Center, MIT.
Alter S (1999). Information Systems: A Management Perspective. Addison Wesley: Amsterdam.
Angeles R (2005). RFID technologies: Supply chain applications and implementation issues. Information Systems Management 22 (1): 51–65.
Atali A, Lee H and Ozer O (2005). If the inventory manager knew: Value of RFID under imperfect inventory information. In: MSOM Conference, the Annual Meeting of the INFORMS Society on Manufacturing and Service Operations Management, 27–28 June, Northwestern University’s Evanston, Illinois.
Attaran M (2004). Exploring the relationship between information technology and business process reengineering. Information and Management 41 (5): 585–596.
Bagchi S, Buckley S, Ettl M and Lin G (1998). Experience using the IBM supply chain simulator. In: Proceeding of the 1998 Winter Simulation Conference, Washington, DC, IEEE Computer Society Press, Los Alamitos, pp 1387–1394.
Balasubramanian S and Gupta M (2005). Structural metrics for goal based business process design and evaluation. Business Process Management Journal 11 (6): 680–694.
Barnett MW and Miller CJ (2000). Analysis of the virtual enterprise using distributed supply chain modelling and simulation: an application of e-SCOR, In: Proceedings of the 2000 Winter Simulation Conference.
Beamon BM and Chen VCP (2001). Performance analysis of conjoined supply chains. International Journal of Production Research 39 (14): 3195–3218.
Becker J, Vilkov L, Weiß B and Winkelmann A (2009). A model based approach for calculating the process driven business value of RFID investments. International Journal of Production Economics 127 (2): 358–371.
Bendavid Y, Lefebvre E, Lefebvre LA and Fosso Wamba S (2009). Key performance indicators for the evaluation of RFID-enabled B-to-B e-commerce applications: The case of a five-layer supply chain. Information Systems and E-Business Management 7 (1): 1–20.
Brintrup AM, Ramsden J, Takagi H and Tiwari A (2008). Ergonomic chair design by fusing qualitative and quantitative criteria using interactive genetic algorithms. IEEE Transactions on Evolutionary Computation 12 (3): 343–354.
Butler KA, Bahrami A, Esposito C and Hebron R (2000). Conceptual models for coordinating the design of user work with the design of information systems. Data & Knowledge Engineering 33 (2): 191–198.
Buzacott JA (2006). Commonalities in reengineered business processes: models and issues. Management Science 42 (5): 768–782.
Capone G, Costlow D, Grenoble WL and Novack RA (2004). The RFID-Enabled Warehouse. Center for Supply-Chain Research, Penn State University.
CASAGRAS Final Report (2009). RFID and the Inclusive Model for the Internet of Things. An EU Framework 7 Project, EU Project Number 216803, http://www.grifs-project.eu/data/File/CASAGRAS%20FinalReport%20(2).pdf.
Chao CC, Yang JM and Jen WY (2007). Determining technology trends and forecasts of RFID by a historical review and bibliometric analysis from 1991 to 2005. Technovation 27 (5): 268–279.
Chappell G, Ginsburg L, Schmidt P, Smith J and Tobolski J (2003). Auto-ID on the line: The value of Auto-ID technology in manufacturing, White Paper, Auto-ID Center, MIT.
Chuang ML and Shaw WH (2005). How RFID will impact supply chain networks. In: IEEE International Engineering Management Conference. St. John's Newfoundland & Labrador, Canada.
Cordella A and Contini A (2007). Information system and information infrastructure deployment: The challenge of the Italian e-justice approach. Electronic Journal of E-Government 5 (1): 43–52.
Curtin J, Kauffman RJ and Riggins FJ (2007). Making the ‘MOST’ out of RFID technology: A research agenda for the study of the adoption, usage and impact of RFID. Information Technology and Management 8 (2): 87–110.
Davenport TH (1993). Process Innovation: Reengineering Work Through Information Technology. Harvard Business School Press: Boston, MA.
Davenport TH and Short JE (1990). The new industrial engineering: Information technology and business process redesign. Sloan Management Review 31 (4): 11–27.
Doerr KH, Gates WR and Mutty JE (2006). A hybrid approach to the valuation of RFID/MEMS technology applied to ordnance inventory. International Journal of Production Economics 103 (2): 726–741.
Doukidis GI and Paul RJ (1985). Research into expert systems to aid simulation model formulation. Journal of the Operational Research Society 36 (4): 319–325.
Dutta A, Lee H and Whang S (2007). RFID and operations management: Technology, value, and incentives. Production and Operations Management 16 (5): 646–655.
Ferrer G, Dew N and Apte U (2010). When is RFID right for your service? International Journal of Production Economics 124 (2): 414–425.
Fleisch E and Tellkamp C (2005). Inventory inaccuracy and supply chain performance: A simulation study of a retail supply chain. International Journal of Production Economics 95 (3): 373–385.
Gaukler G, Seifert R and Hausman W (2006). Item-level RFID in the retail supply chain. Production and Operations Management 16 (1): 65–76.
Gunasekaran A and Nath B (1997). The role of information technology in business process reengineering. International Journal of Production Economics 50 (2–3): 91–104.
Hammer M and Champy J (1993). Reengineering the Corporation: A Manifesto for Business Revolution. New York: HarperBusiness.
Hardgrave B and Miller R (2006). The myths and realities of RFID. International Journal of Global Logistics & Supply Chain Management 1 (1): 1–16.
Harding AJ and Popplewell K (2000). Simulation: An application of factory design process methodology. The Journal of the Operational Research Society Progress in Simulation Research 51 (4): 440–448.
Irani Z, Sharp JM and Race P (1997). A case experience of new product introduction within a once traditional subcontract manufacturing environment. Production and Inventory Management Journal 38 (2): 47–51.
Irani Z and Sharp JM (1997). Integrating continuous improvement and innovation into a corporate culture: A case study. The International Journal of Technological Innovation and Entepreneurship (Technovation) 17 (4): 199–206.
Jones P, Clarke-Hill C, Hiller D and Comfort D (2005). The benefits, challenges and impacts of radio frequency identification technology (RFID) for retailers in the UK. Marketing Intelligence & Planning 23 (4): 395–402.
Karkkainen M (2003). Increasing efficiency in the supply chain for short shelf life goods using RFID tagging. International Journal of Retail & Distribution Management 31 (10): 529–536.
Keith A et al (2002). Focus on the Supply Chain: Applying Auto-ID within the Distribution Center. Auto-ID: Cambridge, MA.
Lapide L (2004). RFID: What’s in it for the forecaster? The Journal of Business Forecasting Methods & Systems 23 (2): 16–19.
Lee HL (2007). Peering through a glass darkly. ECR Journal: International Commerce Review 7 (1): 60–68.
Lee I (2004). Evaluating business process-integrated information technology investment. Business Process Management Journal 10 (2): 214–233.
Lee YM, Chen F and Leung YT (2004). Exploring the impact of RFID on supply chain dynamics. In: Proceedings of the 2004 Winter Simulation Conference, Omnipress: Washington, DC, 1145–1152.
Lee HL and Özer Ö (2007). Unlocking the value of RFID. Production and Operations Management 16 (1): 40–64.
Lefebvre LA, Lefebvre E, Bendavid Y, Fosso Wamba S and Boeck H (2005). The potential of RFID in warehousing activities in a retail industry supply chain. Journal of Chain and Network Science 5 (2): 101–111.
Loebbecke C (2007). Piloting RFID along the supply chain: A case analysis. Electronic Markets 17 (1): 29–37.
Melão N and Pidd M (2003). Use of business process simulation: A survey of practitioners. The Journal of the Operational Research Society 54 (1): 2–10.
Ngai EWT, Moon KKL, Riggins FJ and Yi CY (2008). RFID research: An academic literature review (1995–2005) and future research directions. International Journal of Production Economics 112 (2): 510–520.
Nidumolu SA, Menon NM and Zeigler BP (1998). Object-oriented business process modeling and simulation: A discrete event system specification framework. Simulation Practice and Theory 6 (6): 533–571.
Palsson H (2007). Participant observation in logistics research: Experiences from an RFID implementation study. International Journal of Physical Distribution & Logistics Management 37 (2): 148–163.
Paul RJ and Serrano A (2004). Collaborative information systems and business process design using simulation. In: Proceedings of the 37th Annual Hawaii International Conference on System Sciences (HICSS'04). Big Island, HI, System Sciences.
Pramatari KC, Doukidis G.I. and Kourouthanassis P. (2005). Towards ‘Smarter’ Supply and Demand-Chain Collaboration Practices Enabled by RFID technology. Springer Berlin Heidelberg, Consumer Driven Electronic Transformation: Berlin: pp 241–256.
Reijers HA and Mansar SL (2005). Best practices in business process redesign: An overview and qualitative evaluation of successful redesign heuristics. Omega 33 (4): 283–306.
Reyes PM and Jaska P (2007). Is RFID right for your organisation or application? Management Research News 30 (8): 570–580.
Roh JJ, Kunnathur A and Tarafdar M (2009). Classification of RFID adoption: An expected benefits approach. Information & Management 46 (6): 357–363.
Rupp RO and Russell JR (1994). The golden rules of process redesign. Quality Progress 27 (12): 85–92.
Schunk D and Plott B (2000). Using simulation to analyze supply chains. In: Proceedings of the 32nd conference on Winter Simulation, Society for Computer Simulation International: Orlando, FL.
Seidmann A and Sundararajan A (1997). The effects of task and information asymmetry on business process redesign. International Journal of Production Economics 50 (2/3): 117–128.
Sellitto C, Burgess S and Hawking P (2007). Information quality attributes associated with RFID-derived benefits in the retail supply chain. International Journal of Retail & Distribution Management 35 (1): 69–87.
Senko JM and Suskind PB (1990). Proper planning and simulation play a major role in proper warehouse design. Industrial Engineering 22 (6): 34–37.
Srivastava B (2004). Radio frequency ID technology: The next revolution in SCM. Business Horizons 47 (6): 60–68.
Tajima M (2007). Strategic value of RFID in supply chain management. Journal of Purchasing and Supply Management 13 (4): 261–273.
Ustundag A and Tamyas M (2009). The impacts of radio frequency identification technology on supply chain costs. Transportation Research Part E: Logistics and Transportation Review 45 (1): 29–38.
van der Aalst WMP (2001). Re-engineering knock-out processes. Decision Support Systems 30 (4): 451–468.
van der Aalst WMP and van Hee KM (2004). Workflow Management: Models, Methods, and Systems. MIT Press: Cambridge, MA.
Wang S, Liu S and Wang W (2008). The simulated impact of RFID-enabled supply chain on pull-based inventory replenishment in TFT-LCD industry. International Journal of Production Economics 112 (2): 570–586.
Wu NC, Nystrom MA, Lin TR and Yu HC (2006). Challenges to global RFID adoption. Technovation 26 (12): 1317–1323.
Yin R (1989). Case Study Research: Design and Methods. Rev. edn. Sage Publishing: Newbury Park, CA.
Yin R (2003). Case Study Research: Design and Methods, 3rd edn. Sage: Thousand Oaks, CA.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Karagiannaki, A., Doukidis, G. & Pramatari, K. A framework for mapping the RFID-enabled process redesign in a simulation model. J Oper Res Soc 65, 1700–1710 (2014). https://doi.org/10.1057/jors.2013.128
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1057/jors.2013.128